brite-MPI-example.cc

Go to the documentation of this file.

/*
 * Copyright (c) 2012 The Georgia Institute of Technology
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation;
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 *
 * Author: Brian Swenson <bswenson3@gatech.edu>
 */
 
#include "Brite.h"
 
#include "ns3/applications-module.h"
#include "ns3/brite-module.h"
#include "ns3/core-module.h"
#include "ns3/internet-module.h"
#include "ns3/mobility-module.h"
#include "ns3/mpi-interface.h"
#include "ns3/network-module.h"
#include "ns3/nix-vector-helper.h"
#include "ns3/point-to-point-module.h"
 
#include <fstream>
#include <iostream>
#include <string>
 
#ifdef NS3_MPI
#include <mpi.h>
#endif
 
using namespace ns3;
 
NS_LOG_COMPONENT_DEFINE("BriteMPITest");
 
int
main(int argc, char* argv[])
{
#ifdef NS3_MPI
    // Distributed simulation setup
    MpiInterface::Enable(&argc, &argv);
    GlobalValue::Bind("SimulatorImplementationType", StringValue("ns3::DistributedSimulatorImpl"));
 
    LogComponentEnable("BriteMPITest", LOG_LEVEL_ALL);
    LogComponentEnable("TcpSocketBase", LOG_LEVEL_INFO);
 
    uint32_t systemId = MpiInterface::GetSystemId();
    uint32_t systemCount = MpiInterface::GetSize();
 
    // Check for valid distributed parameters.
    // For just this particular example, must have 2 and only 2 Logical Processors (LPs)
    NS_ASSERT_MSG(systemCount == 2, "This demonstration requires 2 and only 2 logical processors.");
 
    // BRITE needs a configuration file to build its graph. By default, this
    // example will use the TD_ASBarabasi_RTWaxman.conf file. There are many others
    // which can be found in the BRITE/conf_files directory
    std::string confFile = "src/brite/examples/conf_files/TD_ASBarabasi_RTWaxman.conf";
    bool tracing = false;
    bool nix = false;
 
    CommandLine cmd(__FILE__);
    cmd.AddValue("confFile", "BRITE conf file", confFile);
    cmd.AddValue("tracing", "Enable or disable ascii tracing", tracing);
    cmd.AddValue("nix", "Enable or disable nix-vector routing", nix);
 
    cmd.Parse(argc, argv);
 
    // Invoke the BriteTopologyHelper and pass in a BRITE
    // configuration file and a seed file. This will use
    // BRITE to build a graph from which we can build the ns-3 topology
    BriteTopologyHelper bth(confFile);
 
    PointToPointHelper p2p;
 
    InternetStackHelper stack;
 
    if (nix)
    {
        Ipv4NixVectorHelper nixRouting;
        stack.SetRoutingHelper(nixRouting);
    }
 
    Ipv4AddressHelper address;
    address.SetBase("10.0.0.0", "255.255.255.252");
 
    // build topology as normal but also pass systemCount
    bth.BuildBriteTopology(stack, systemCount);
    bth.AssignIpv4Addresses(address);
 
    NS_LOG_LOGIC("Number of AS created " << bth.GetNAs());
 
    uint16_t port = 5001;
 
    NodeContainer client;
    NodeContainer server;
 
    // For this example will use AS 0 and AS 1 which will be on separate systems
    // due to the mod divide used to assign AS to system.
 
    // GetSystemNumberForAs (uint32_t) can be used to determine which system an
    // AS is assigned to
    NS_LOG_LOGIC("AS 0 has been assigned to system " << bth.GetSystemNumberForAs(0));
    NS_LOG_LOGIC("As 1 has been assigned to system " << bth.GetSystemNumberForAs(1));
 
    // install client node on last leaf node of AS 0
    client.Add(CreateObject<Node>(0));
    stack.Install(client);
    int numLeafNodesInAsZero = bth.GetNLeafNodesForAs(0);
    client.Add(bth.GetLeafNodeForAs(0, numLeafNodesInAsZero - 1));
 
    // install server node on last leaf node on AS 1
    server.Add(CreateObject<Node>(1));
    stack.Install(server);
    int numLeafNodesInAsOne = bth.GetNLeafNodesForAs(1);
    server.Add(bth.GetLeafNodeForAs(1, numLeafNodesInAsOne - 1));
 
    p2p.SetDeviceAttribute("DataRate", StringValue("5Mbps"));
    p2p.SetChannelAttribute("Delay", StringValue("2ms"));
 
    NetDeviceContainer p2pClientDevices;
    NetDeviceContainer p2pServerDevices;
 
    p2pClientDevices = p2p.Install(client);
    p2pServerDevices = p2p.Install(server);
 
    address.SetBase("10.1.0.0", "255.255.0.0");
    Ipv4InterfaceContainer clientInterfaces;
    clientInterfaces = address.Assign(p2pClientDevices);
 
    address.SetBase("10.2.0.0", "255.255.0.0");
    Ipv4InterfaceContainer serverInterfaces;
    serverInterfaces = address.Assign(p2pServerDevices);
 
    if (!nix)
    {
        Ipv4GlobalRoutingHelper::PopulateRoutingTables();
    }
 
    // only has two systems in this example.  Install applications only on nodes in my system
 
    // Moved here to get totalRX at end
    ApplicationContainer sinkApps;
 
    if (systemId == 1)
    {
        Address sinkLocalAddress(InetSocketAddress(Ipv4Address::GetAny(), port));
        PacketSinkHelper packetSinkHelper("ns3::TcpSocketFactory", sinkLocalAddress);
        sinkApps.Add(packetSinkHelper.Install(server.Get(0)));
        sinkApps.Start(Seconds(0.0));
        sinkApps.Stop(Seconds(10.0));
    }
 
    if (systemId == 0)
    {
        OnOffHelper clientHelper("ns3::TcpSocketFactory", Address());
        clientHelper.SetAttribute("OnTime", StringValue("ns3::ConstantRandomVariable[Constant=1]"));
        clientHelper.SetAttribute("OffTime",
                                  StringValue("ns3::ConstantRandomVariable[Constant=0]"));
 
        ApplicationContainer clientApps;
        AddressValue remoteAddress(InetSocketAddress(serverInterfaces.GetAddress(0), port));
        clientHelper.SetAttribute("Remote", remoteAddress);
        clientApps.Add(clientHelper.Install(client.Get(0)));
        clientApps.Start(Seconds(1.0)); // Start 1 second after sink
        clientApps.Stop(Seconds(9.0));  // Stop before the sink
    }
 
    if (!nix)
    {
        Ipv4GlobalRoutingHelper::PopulateRoutingTables();
    }
 
    if (tracing)
    {
        AsciiTraceHelper ascii;
        p2p.EnableAsciiAll(ascii.CreateFileStream("briteLeaves.tr"));
    }
 
    // Run the simulator
    Simulator::Stop(Seconds(200.0));
    Simulator::Run();
    Simulator::Destroy();
 
    if (systemId == 1)
    {
        Ptr<PacketSink> sink1 = DynamicCast<PacketSink>(sinkApps.Get(0));
        NS_LOG_DEBUG("Total Bytes Received: " << sink1->GetTotalRx());
    }
 
    MpiInterface::Disable();
 
    return 0;
 
#else
    NS_FATAL_ERROR("Can't use distributed simulator without MPI compiled in");
#endif
}