22 #ifndef LTE_SPECTRUM_PHY_H
23 #define LTE_SPECTRUM_PHY_H
30 #include <ns3/data-rate.h>
31 #include <ns3/event-id.h>
32 #include <ns3/generic-phy.h>
33 #include <ns3/mobility-model.h>
34 #include <ns3/net-device.h>
35 #include <ns3/nstime.h>
36 #include <ns3/packet-burst.h>
37 #include <ns3/packet.h>
38 #include <ns3/random-variable-stream.h>
39 #include <ns3/spectrum-channel.h>
40 #include <ns3/spectrum-interference.h>
41 #include <ns3/spectrum-phy.h>
42 #include <ns3/spectrum-value.h>
63 TbId_t(
const uint16_t a,
const uint8_t b);
407 std::vector<int> map,
interface for antenna radiation pattern models
An identifier for simulation events.
The LteControlMessage provides a basic implementations for control messages (such as PDCCH allocation...
LteNetDevice provides basic implementation for all LTE network devices.
The LteSpectrumPhy models the physical layer of LTE.
void RemoveExpectedTb(uint16_t rnti)
Remove expected transport block.
Ptr< const SpectrumModel > m_rxSpectrumModel
the spectrum model
TracedCallback< Ptr< const PacketBurst > > m_phyTxEndTrace
the phy transmit end trace callback
bool m_dataErrorModelEnabled
when true (default) the phy error model is enabled
void SetState(State newState)
Set the state of the phy layer.
Ptr< LteInterference > m_interferenceData
the data interference
uint8_t m_transmissionMode
for UEs: store the transmission mode
EventId m_endRxDlCtrlEvent
end receive DL control event
void AddCtrlSinrChunkProcessor(Ptr< LteChunkProcessor > p)
void AddDataSinrChunkProcessor(Ptr< LteChunkProcessor > p)
LtePhyUlHarqFeedbackCallback m_ltePhyUlHarqFeedbackCallback
the LTE phy UL HARQ feedback callback
void AddExpectedTb(uint16_t rnti, uint8_t ndi, uint16_t size, uint8_t mcs, std::vector< int > map, uint8_t layer, uint8_t harqId, uint8_t rv, bool downlink)
Ptr< MobilityModel > GetMobility() const override
Get the associated MobilityModel instance.
Ptr< const SpectrumModel > GetRxSpectrumModel() const override
void SetHarqPhyModule(Ptr< LteHarqPhy > harq)
Set HARQ phy function.
LtePhyRxPssCallback m_ltePhyRxPssCallback
the LTE phy receive PSS callback
void StartRxDlCtrl(Ptr< LteSpectrumSignalParametersDlCtrlFrame > lteDlCtrlRxParams)
Start receive DL control function.
void StartRxUlSrs(Ptr< LteSpectrumSignalParametersUlSrsFrame > lteUlSrsRxParams)
Start receive UL SRS function.
void AddDataPowerChunkProcessor(Ptr< LteChunkProcessor > p)
EventId m_endRxDataEvent
end receive data event
void SetLtePhyRxPssCallback(LtePhyRxPssCallback c)
set the callback for the reception of the PSS as part of the interconnections between the LteSpectrum...
void SetAntenna(Ptr< AntennaModel > a)
set the AntennaModel to be used
void StartRxData(Ptr< LteSpectrumSignalParametersDataFrame > params)
Start receive data function.
TracedCallback< PhyReceptionStatParameters > m_dlPhyReception
Trace information regarding PHY stats from DL Rx perspective PhyReceptionStatParameters (see lte-comm...
Ptr< NetDevice > m_device
the device
Ptr< SpectrumChannel > GetChannel()
TracedCallback< Ptr< const PacketBurst > > m_phyTxStartTrace
the phy transmit start trace callback
void DoDispose() override
Destructor implementation.
void EndTxData()
End transmit data function.
void SetTransmissionMode(uint8_t txMode)
void SetLtePhyRxDataEndErrorCallback(LtePhyRxDataEndErrorCallback c)
set the callback for the end of a RX in error, as part of the interconnections between the PHY and th...
SpectrumValue m_sinrPerceived
the preceived SINR
Ptr< SpectrumValue > m_txPsd
the transmit PSD
void AddInterferenceDataChunkProcessor(Ptr< LteChunkProcessor > p)
LteChunkProcessor devoted to evaluate interference + noise power in data symbols of the subframe.
void SetDevice(Ptr< NetDevice > d) override
Set the associated NetDevice instance.
void ChangeState(State newState)
Change state function.
void SetTxModeGain(uint8_t txMode, double gain)
Set transmit mode gain function.
std::vector< double > m_txModeGain
duplicate value of LteUePhy
int64_t AssignStreams(int64_t stream)
Assign a fixed random variable stream number to the random variables used by this model.
Ptr< NetDevice > GetDevice() const override
Get the associated NetDevice instance.
Time m_firstRxStart
the first receive start
Ptr< LteHarqPhy > m_harqPhyModule
the HARQ phy module
void SetLtePhyRxDataEndOkCallback(LtePhyRxDataEndOkCallback c)
set the callback for the successful end of a RX, as part of the interconnections between the PHY and ...
void EndRxUlSrs()
End receive UL SRS function.
void SetLtePhyUlHarqFeedbackCallback(LtePhyUlHarqFeedbackCallback c)
set the callback for the UL HARQ feedback as part of the interconnections between the LteSpectrumPhy ...
void SetChannel(Ptr< SpectrumChannel > c) override
Set the channel attached to this device.
void SetComponentCarrierId(uint8_t componentCarrierId)
TracedCallback< Ptr< const PacketBurst > > m_phyRxStartTrace
the phy receive start trace callback
expectedTbs_t m_expectedTbs
the expected TBS
void EndTxUlSrs()
End transmit UL SRS function.
void SetNoisePowerSpectralDensity(Ptr< const SpectrumValue > noisePsd)
set the noise power spectral density
void UpdateSinrPerceived(const SpectrumValue &sinr)
Ptr< SpectrumChannel > m_channel
the channel
void EndRxDlCtrl()
End receive DL control function.
void SetTxPowerSpectralDensity(Ptr< SpectrumValue > txPsd)
set the Power Spectral Density of outgoing signals in W/Hz.
EventId m_endTxEvent
end transmit event
LtePhyRxDataEndOkCallback m_ltePhyRxDataEndOkCallback
the LTE phy receive data end ok callback
void SetLtePhyRxCtrlEndErrorCallback(LtePhyRxCtrlEndErrorCallback c)
set the callback for the erroneous end of a RX ctrl frame, as part of the interconnections between th...
uint16_t m_cellId
the cell ID
Ptr< AntennaModel > m_antenna
the antenna model
void SetLtePhyDlHarqFeedbackCallback(LtePhyDlHarqFeedbackCallback c)
set the callback for the DL HARQ feedback as part of the interconnections between the LteSpectrumPhy ...
Time m_firstRxDuration
the first receive duration
Ptr< PacketBurst > m_txPacketBurst
the transmit packet burst
uint8_t m_componentCarrierId
the component carrier ID
void StartRx(Ptr< SpectrumSignalParameters > params) override
Notify the SpectrumPhy instance of an incoming signal.
Ptr< Object > GetAntenna() const override
Get the AntennaModel used by this SpectrumPhy instance for transmission and/or reception.
LtePhyRxDataEndErrorCallback m_ltePhyRxDataEndErrorCallback
the LTE phy receive data end error callback
static TypeId GetTypeId()
Get the type ID.
uint8_t m_layersNum
layers num
Ptr< MobilityModel > m_mobility
the modility model
~LteSpectrumPhy() override
TracedCallback< PhyReceptionStatParameters > m_ulPhyReception
Trace information regarding PHY stats from UL Rx perspective PhyReceptionStatParameters (see lte-comm...
void SetMobility(Ptr< MobilityModel > m) override
Set the mobility model associated with this device.
LtePhyDlHarqFeedbackCallback m_ltePhyDlHarqFeedbackCallback
the LTE phy DL HARQ feedback callback
void EndTxDlCtrl()
End transmit DL control function.
std::list< Ptr< LteControlMessage > > m_rxControlMessageList
the receive control message list
void AddRsPowerChunkProcessor(Ptr< LteChunkProcessor > p)
Ptr< LteInterference > m_interferenceCtrl
the control interference
TracedCallback< Ptr< const Packet > > m_phyRxEndErrorTrace
the phy receive end error trace callback
void EndRxData()
End receive data function.
std::list< Ptr< LteControlMessage > > m_txControlMessageList
the transmit control message list
bool m_ctrlErrorModelEnabled
when true (default) the phy error model is enabled for DL ctrl frame
bool StartTxDataFrame(Ptr< PacketBurst > pb, std::list< Ptr< LteControlMessage >> ctrlMsgList, Time duration)
Start a transmission of data frame in DL and UL.
std::list< Ptr< PacketBurst > > m_rxPacketBurstList
the receive burst list
void AddInterferenceCtrlChunkProcessor(Ptr< LteChunkProcessor > p)
LteChunkProcessor devoted to evaluate interference + noise power in control symbols of the subframe.
TracedCallback< Ptr< const Packet > > m_phyRxEndOkTrace
the phy receive end ok trace callback
bool StartTxUlSrsFrame()
Start a transmission of control frame in UL.
bool StartTxDlCtrlFrame(std::list< Ptr< LteControlMessage >> ctrlMsgList, bool pss)
Start a transmission of control frame in DL.
LtePhyRxCtrlEndErrorCallback m_ltePhyRxCtrlEndErrorCallback
the LTE phy receive control end error callback
void SetLtePhyRxCtrlEndOkCallback(LtePhyRxCtrlEndOkCallback c)
set the callback for the successful end of a RX ctrl frame, as part of the interconnections between t...
void Reset()
reset the internal state
EventId m_endRxUlSrsEvent
end receive UL SRS event
void SetCellId(uint16_t cellId)
LtePhyRxCtrlEndOkCallback m_ltePhyRxCtrlEndOkCallback
the LTE phy receive control end ok callback
Ptr< UniformRandomVariable > m_random
Provides uniform random variables.
The LteSpectrumPhy models the physical layer of LTE.
Smart pointer class similar to boost::intrusive_ptr.
Abstract base class for Spectrum-aware PHY layers.
Set of values corresponding to a given SpectrumModel.
Simulation virtual time values and global simulation resolution.
Forward calls to a chain of Callback.
a unique identifier for an interface.
Every class exported by the ns3 library is enclosed in the ns3 namespace.
Callback< void, Ptr< Packet > > LtePhyRxDataEndOkCallback
This method is used by the LteSpectrumPhy to notify the PHY that a previously started RX attempt has ...
Callback< void, uint16_t, Ptr< SpectrumValue > > LtePhyRxPssCallback
This method is used by the LteSpectrumPhy to notify the UE PHY that a PSS has been received.
std::map< TbId_t, tbInfo_t > expectedTbs_t
expectedTbs_t typedef
Callback< void > LtePhyRxDataEndErrorCallback
This method is used by the LteSpectrumPhy to notify the PHY that a previously started RX attempt has ...
Callback< void, std::list< Ptr< LteControlMessage > > > LtePhyRxCtrlEndOkCallback
This method is used by the LteSpectrumPhy to notify the PHY that a previously started RX of a control...
Callback< void, DlInfoListElement_s > LtePhyDlHarqFeedbackCallback
This method is used by the LteSpectrumPhy to notify the PHY about the status of a certain DL HARQ pro...
Callback< void > LtePhyRxCtrlEndErrorCallback
This method is used by the LteSpectrumPhy to notify the PHY that a previously started RX of a control...
Callback< void, UlInfoListElement_s > LtePhyUlHarqFeedbackCallback
This method is used by the LteSpectrumPhy to notify the PHY about the status of a certain UL HARQ pro...
params
Fit Fluctuating Two Ray model to the 3GPP TR 38.901 using the Anderson-Darling goodness-of-fit ##.
Signal parameters for Lte Data Frame (PDSCH), and eventually after some control messages through othe...
Signal parameters for Lte DL Ctrl Frame (RS, PCFICH and PDCCH)
Signal parameters for Lte SRS Frame.
friend bool operator<(const TbId_t &a, const TbId_t &b)
Less than operator.
friend bool operator==(const TbId_t &a, const TbId_t &b)
Equality operator.
uint8_t harqProcessId
HARQ process id.
std::vector< int > rbBitmap
Resource block bitmap.
uint8_t rv
Redundancy version.
bool corrupt
whether is corrupt
bool harqFeedbackSent
is HARQ feedback sent
double mi
Mutual information.
bool downlink
whether is downlink
uint16_t size
Transport block size.
uint8_t ndi
New data indicator.