Two channel Phy. More...

#include "uan-phy-dual.h"

Inheritance diagram for ns3::UanPhyDual:

Collaboration diagram for ns3::UanPhyDual:

Public Member Functions
	UanPhyDual ()
	Constructor. More...

	~UanPhyDual () override
	Dummy destructor. More...

int64_t	AssignStreams (int64_t stream) override
	Assign a fixed random variable stream number to the random variables used by this model. More...

void	Clear () override
	Clear all pointer references. More...

void	EnergyDepletionHandler () override
	Handle the energy depletion event. More...

void	EnergyRechargeHandler () override
	Handle the energy recharge event. More...

double	GetCcaThresholdDb () override
	Get the CCA threshold signal strength required to detect channel busy. More...

double	GetCcaThresholdPhy1 () const
	Get the CCA threshold signal strength required to detect channel busy. More...

double	GetCcaThresholdPhy2 () const
	Get the CCA threshold signal strength required to detect channel busy. More...

Ptr< UanChannel >	GetChannel () const override
	Get the attached channel. More...

Ptr< UanNetDevice >	GetDevice () const override
	Get the device hosting this Phy. More...

UanTxMode	GetMode (uint32_t n) override
	Get a specific transmission mode. More...

UanModesList	GetModesPhy1 () const
	Get the list of available modes. More...

UanModesList	GetModesPhy2 () const
	Get the list of available modes. More...

uint32_t	GetNModes () override
	Get the number of transmission modes supported by this Phy. More...

Ptr< Packet >	GetPacketRx () const override
	Get the packet currently being received. More...

Ptr< UanPhyPer >	GetPerModelPhy1 () const
	Get the error probability model. More...

Ptr< UanPhyPer >	GetPerModelPhy2 () const
	Get the error probability model. More...

Ptr< Packet >	GetPhy1PacketRx () const
	Get the packet currently being received. More...

Ptr< Packet >	GetPhy2PacketRx () const
	Get the packet currently being received. More...

double	GetRxThresholdDb () override
	Get the minimum received signal strength required to receive a packet without errors. More...

Ptr< UanPhyCalcSinr >	GetSinrModelPhy1 () const
	Get the SINR calculator. More...

Ptr< UanPhyCalcSinr >	GetSinrModelPhy2 () const
	Get the SINR calculator. More...

Ptr< UanTransducer >	GetTransducer () override
	Get the attached transducer. More...

double	GetTxPowerDb () override
	Get the current transmit power, in dB. More...

double	GetTxPowerDbPhy1 () const
	Get the current transmit power, in dB. More...

double	GetTxPowerDbPhy2 () const
	Get the current transmit power, in dB. More...

bool	IsPhy1Idle ()

bool	IsPhy1Rx ()

bool	IsPhy1Tx ()

bool	IsPhy2Idle ()

bool	IsPhy2Rx ()

bool	IsPhy2Tx ()

bool	IsStateBusy () override

bool	IsStateCcaBusy () override

bool	IsStateIdle () override

bool	IsStateRx () override

bool	IsStateSleep () override

bool	IsStateTx () override

void	NotifyIntChange () override
	Called when there has been a change in the amount of interference this node is experiencing from other transmissions. More...

void	NotifyTransStartTx (Ptr< Packet > packet, double txPowerDb, UanTxMode txMode) override
	Called when a transmission is beginning on the attached transducer. More...

void	RegisterListener (UanPhyListener *listener) override
	Register a UanPhyListener to be notified of common UanPhy events. More...

void	SendPacket (Ptr< Packet > pkt, uint32_t modeNum) override
	Send a packet using a specific transmission mode. More...

void	SetCcaThresholdDb (double thresh) override
	Set the threshold for detecting channel busy. More...

void	SetCcaThresholdPhy1 (double thresh)
	Set the threshold for detecting channel busy. More...

void	SetCcaThresholdPhy2 (double thresh)
	Set the threshold for detecting channel busy. More...

void	SetChannel (Ptr< UanChannel > channel) override
	Attach to a channel. More...

void	SetDevice (Ptr< UanNetDevice > device) override
	Set the device hosting this Phy. More...

void	SetEnergyModelCallback (DeviceEnergyModel::ChangeStateCallback callback) override
	Set the DeviceEnergyModel callback for UanPhy device. More...

void	SetMac (Ptr< UanMac > mac) override
	Set the MAC forwarding messages to this Phy. More...

void	SetModesPhy1 (UanModesList modes)
	Set the available modes. More...

void	SetModesPhy2 (UanModesList modes)
	Set the available modes. More...

void	SetPerModelPhy1 (Ptr< UanPhyPer > per)
	Set the error probability model. More...

void	SetPerModelPhy2 (Ptr< UanPhyPer > per)
	Set the error probability model. More...

void	SetReceiveErrorCallback (RxErrCallback cb) override
	Set the callback to be used when a packet is received with errors. More...

void	SetReceiveOkCallback (RxOkCallback cb) override
	Set the callback to be used when a packet is received without error. More...

void	SetRxThresholdDb (double thresh) override
	Set the minimum SINR threshold to receive a packet without errors. More...

void	SetSinrModelPhy1 (Ptr< UanPhyCalcSinr > calcSinr)
	Set the SINR calculator. More...

void	SetSinrModelPhy2 (Ptr< UanPhyCalcSinr > calcSinr)
	Set the SINR calculator. More...

void	SetSleepMode (bool) override
	Set the Phy SLEEP mode. More...

void	SetTransducer (Ptr< UanTransducer > trans) override
	Attach a transducer to this Phy. More...

void	SetTxPowerDb (double txpwr) override
	Set the transmit power. More...

void	SetTxPowerDbPhy1 (double txpwr)
	Set the transmit power. More...

void	SetTxPowerDbPhy2 (double txpwr)
	Set the transmit power. More...

void	StartRxPacket (Ptr< Packet > pkt, double rxPowerDb, UanTxMode txMode, UanPdp pdp) override
	Packet arriving from channel: i.e. More...

Public Member Functions inherited from ns3::UanPhy
void	NotifyRxBegin (Ptr< const Packet > packet)
	Called when the Phy begins to receive a packet. More...

void	NotifyRxDrop (Ptr< const Packet > packet)
	Called when the Phy drops a packet. More...

void	NotifyRxEnd (Ptr< const Packet > packet)
	Called when a packet is received without error. More...

void	NotifyTxBegin (Ptr< const Packet > packet)
	Called when the transducer begins transmitting a packet. More...

void	NotifyTxDrop (Ptr< const Packet > packet)
	Called when the transducer attempts to transmit a new packet while already transmitting a prior packet. More...

void	NotifyTxEnd (Ptr< const Packet > packet)
	Called when the transducer finishes transmitting a packet. More...

Public Member Functions inherited from ns3::Object
	Object ()
	Constructor. More...

	~Object () override
	Destructor. More...

void	AggregateObject (Ptr< Object > other)
	Aggregate two Objects together. More...

void	Dispose ()
	Dispose of this Object. More...

AggregateIterator	GetAggregateIterator () const
	Get an iterator to the Objects aggregated to this one. More...

TypeId	GetInstanceTypeId () const override
	Get the most derived TypeId for this Object. More...

template<typename T >
Ptr< T >	GetObject () const
	Get a pointer to the requested aggregated Object. More...

template<>
Ptr< Object >	GetObject () const
	Specialization of () for objects of type ns3::Object. More...

template<typename T >
Ptr< T >	GetObject (TypeId tid) const
	Get a pointer to the requested aggregated Object by TypeId. More...

template<>
Ptr< Object >	GetObject (TypeId tid) const
	Specialization of (TypeId tid) for objects of type ns3::Object. More...

void	Initialize ()
	Invoke DoInitialize on all Objects aggregated to this one. More...

bool	IsInitialized () const
	Check if the object has been initialized. More...

Public Member Functions inherited from ns3::SimpleRefCount< Object, ObjectBase, ObjectDeleter >
	SimpleRefCount ()
	Default constructor. More...

	SimpleRefCount (const SimpleRefCount &o[[maybe_unused]])
	Copy constructor. More...

uint32_t	GetReferenceCount () const
	Get the reference count of the object. More...

SimpleRefCount &	operator= (const SimpleRefCount &o[[maybe_unused]])
	Assignment operator. More...

void	Ref () const
	Increment the reference count. More...

void	Unref () const
	Decrement the reference count. More...

Public Member Functions inherited from ns3::ObjectBase
virtual	~ObjectBase ()
	Virtual destructor. More...

void	GetAttribute (std::string name, AttributeValue &value) const
	Get the value of an attribute, raising fatal errors if unsuccessful. More...

bool	GetAttributeFailSafe (std::string name, AttributeValue &value) const
	Get the value of an attribute without raising errors. More...

void	SetAttribute (std::string name, const AttributeValue &value)
	Set a single attribute, raising fatal errors if unsuccessful. More...

bool	SetAttributeFailSafe (std::string name, const AttributeValue &value)
	Set a single attribute without raising errors. More...

bool	TraceConnect (std::string name, std::string context, const CallbackBase &cb)
	Connect a TraceSource to a Callback with a context. More...

bool	TraceConnectWithoutContext (std::string name, const CallbackBase &cb)
	Connect a TraceSource to a Callback without a context. More...

bool	TraceDisconnect (std::string name, std::string context, const CallbackBase &cb)
	Disconnect from a TraceSource a Callback previously connected with a context. More...

bool	TraceDisconnectWithoutContext (std::string name, const CallbackBase &cb)
	Disconnect from a TraceSource a Callback previously connected without a context. More...

Static Public Member Functions
static TypeId	GetTypeId ()
	Register this type. More...

Static Public Member Functions inherited from ns3::UanPhy
static TypeId	GetTypeId ()
	Register this type. More...

Static Public Member Functions inherited from ns3::Object
static TypeId	GetTypeId ()
	Register this type. More...

Static Public Member Functions inherited from ns3::ObjectBase
static TypeId	GetTypeId ()
	Get the type ID. More...

Protected Member Functions
void	DoDispose () override
	Destructor implementation. More...

Protected Member Functions inherited from ns3::Object
	Object (const Object &o)
	Copy an Object. More...

virtual void	DoInitialize ()
	Initialize() implementation. More...

virtual void	NotifyNewAggregate ()
	Notify all Objects aggregated to this one of a new Object being aggregated. More...

Protected Member Functions inherited from ns3::ObjectBase
void	ConstructSelf (const AttributeConstructionList &attributes)
	Complete construction of ObjectBase; invoked by derived classes. More...

virtual void	NotifyConstructionCompleted ()
	Notifier called once the ObjectBase is fully constructed. More...

Private Member Functions
void	RxErrFromSubPhy (Ptr< Packet > pkt, double sinr)
	Handle callback and logger for packets received with error. More...

void	RxOkFromSubPhy (Ptr< Packet > pkt, double sinr, UanTxMode mode)
	Handle callback and logger for packets received without error. More...

Private Attributes
Ptr< UanPhy >	m_phy1
	First Phy layer. More...

Ptr< UanPhy >	m_phy2
	Second Phy layer. More...

RxErrCallback	m_recErrCb
	Callback when packet received with errors. More...

RxOkCallback	m_recOkCb
	Callback when packet received without errors. More...

ns3::TracedCallback< Ptr< const Packet >, double, UanTxMode >	m_rxErrLogger
	A packet was received unsuccessfuly. More...

ns3::TracedCallback< Ptr< const Packet >, double, UanTxMode >	m_rxOkLogger
	A packet was received successfully. More...

ns3::TracedCallback< Ptr< const Packet >, double, UanTxMode >	m_txLogger
	A packet was sent from this Phy. More...

Additional Inherited Members
Public Types inherited from ns3::UanPhy
typedef Callback< void, Ptr< Packet >, double >	RxErrCallback
	Packet receive error callback function type. More...

typedef Callback< void, Ptr< Packet >, double, UanTxMode >	RxOkCallback
	Packet received successfully callback function type. More...

enum	State { IDLE , CCABUSY , RX , TX , SLEEP , DISABLED }
	Enum defining possible Phy states. More...

typedef void(*	TracedCallback) (Ptr< const Packet > pkt, double sinr, UanTxMode mode)
	TracedCallback signature for UanPhy packet send/receive events. More...

Related Functions inherited from ns3::ObjectBase
static TypeId	GetObjectIid ()
	Ensure the TypeId for ObjectBase gets fully configured to anchor the inheritance tree properly. More...

Detailed Description

Two channel Phy.

A class that wraps two generic UAN Phy layers (UanPhyGen) into a single PHY. This is used to simulate two receivers (and transmitters) that use the same front end hardware. When attached to a UanTransducerHd, this results in a net device able to transmit on one or two channels simultaneously or receive on one or two channels simultaneously but that cannot transmit and receive simultaneously.

Many of the standard PHY functions here become ambiguous. In most cases information for "Phy1" are returned.

Definition at line 78 of file uan-phy-dual.h.

Constructor & Destructor Documentation

◆ UanPhyDual()

ns3::UanPhyDual::UanPhyDual ( )

Constructor.

Definition at line 126 of file uan-phy-dual.cc.

References m_phy1, m_phy2, m_recErrCb, and m_recOkCb.

◆ ~UanPhyDual()

ns3::UanPhyDual::~UanPhyDual ( )

override

Dummy destructor.

See also: DoDispose

Definition at line 139 of file uan-phy-dual.cc.

Member Function Documentation

◆ AssignStreams()

int64_t ns3::UanPhyDual::AssignStreams ( int64_t stream )

overridevirtual

Assign a fixed random variable stream number to the random variables used by this model.

Return the number of streams (possibly zero) that have been assigned.

Parameters

stream First stream index to use.

Returns: The number of stream indices assigned by this model.

Implements ns3::UanPhy.

Definition at line 680 of file uan-phy-dual.cc.

References NS_LOG_FUNCTION.

◆ Clear()

void ns3::UanPhyDual::Clear ( )

overridevirtual

Clear all pointer references.

Implements ns3::UanPhy.

Definition at line 144 of file uan-phy-dual.cc.

References m_phy1, and m_phy2.

Referenced by DoDispose().

Here is the caller graph for this function:

◆ DoDispose()

void ns3::UanPhyDual::DoDispose ( void )

overrideprotectedvirtual

Destructor implementation.

This method is called by Dispose() or by the Object's destructor, whichever comes first.

Subclasses are expected to implement their real destruction code in an overridden version of this method and chain up to their parent's implementation once they are done. i.e, for simplicity, the destructor of every subclass should be empty and its content should be moved to the associated DoDispose() method.

It is safe to call GetObject() from within this method.

Reimplemented from ns3::Object.

Definition at line 159 of file uan-phy-dual.cc.

References Clear(), and ns3::Object::DoDispose().

Here is the call graph for this function:

◆ EnergyDepletionHandler()

void ns3::UanPhyDual::EnergyDepletionHandler ( )

overridevirtual

Handle the energy depletion event.

Implements ns3::UanPhy.

Definition at line 260 of file uan-phy-dual.cc.

References NS_LOG_DEBUG.

◆ EnergyRechargeHandler()

void ns3::UanPhyDual::EnergyRechargeHandler ( )

overridevirtual

Handle the energy recharge event.

Implements ns3::UanPhy.

Definition at line 266 of file uan-phy-dual.cc.

References NS_LOG_DEBUG.

◆ GetCcaThresholdDb()

double ns3::UanPhyDual::GetCcaThresholdDb ( )

overridevirtual

Get the CCA threshold signal strength required to detect channel busy.

Returns: The CCA threshold signal strength in dB.

Implements ns3::UanPhy.

Definition at line 390 of file uan-phy-dual.cc.

References m_phy1, and NS_LOG_WARN.

◆ GetCcaThresholdPhy1()

double ns3::UanPhyDual::GetCcaThresholdPhy1 ( ) const

Get the CCA threshold signal strength required to detect channel busy.

Returns: The CCA threshold signal strength in dB.

Definition at line 397 of file uan-phy-dual.cc.

References m_phy1.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ GetCcaThresholdPhy2()

double ns3::UanPhyDual::GetCcaThresholdPhy2 ( ) const

Get the CCA threshold signal strength required to detect channel busy.

Returns: The CCA threshold signal strength in dB.

Definition at line 403 of file uan-phy-dual.cc.

References m_phy2.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ GetChannel()

Ptr< UanChannel > ns3::UanPhyDual::GetChannel ( ) const

overridevirtual

Get the attached channel.

Returns: The channel.

Implements ns3::UanPhy.

Definition at line 493 of file uan-phy-dual.cc.

References m_phy1.

◆ GetDevice()

Ptr< UanNetDevice > ns3::UanPhyDual::GetDevice ( ) const

overridevirtual

Get the device hosting this Phy.

Returns: The net device.

Implements ns3::UanPhy.

Definition at line 499 of file uan-phy-dual.cc.

References m_phy1.

◆ GetMode()

UanTxMode ns3::UanPhyDual::GetMode ( uint32_t n )

overridevirtual

Get a specific transmission mode.

Parameters

n	The mode number.

Returns: The mode.

Implements ns3::UanPhy.

Definition at line 560 of file uan-phy-dual.cc.

References GetNModes(), m_phy1, and m_phy2.

Here is the call graph for this function:

◆ GetModesPhy1()

UanModesList ns3::UanPhyDual::GetModesPhy1 ( ) const

Get the list of available modes.

Returns: The mode list.

Definition at line 573 of file uan-phy-dual.cc.

References m_phy1.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ GetModesPhy2()

UanModesList ns3::UanPhyDual::GetModesPhy2 ( ) const

Get the list of available modes.

Returns: The mode list.

Definition at line 581 of file uan-phy-dual.cc.

References m_phy2.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ GetNModes()

uint32_t ns3::UanPhyDual::GetNModes ( )

overridevirtual

Get the number of transmission modes supported by this Phy.

Returns: The number modes.

Implements ns3::UanPhy.

Definition at line 554 of file uan-phy-dual.cc.

References m_phy1, and m_phy2.

Referenced by GetMode(), and SendPacket().

Here is the caller graph for this function:

◆ GetPacketRx()

Ptr< Packet > ns3::UanPhyDual::GetPacketRx ( ) const

overridevirtual

Get the packet currently being received.

Warning: Returns non-valid pointer if IsStateRx == false.

Returns: The packet.

Implements ns3::UanPhy.

Definition at line 672 of file uan-phy-dual.cc.

References NS_FATAL_ERROR.

◆ GetPerModelPhy1()

Ptr< UanPhyPer > ns3::UanPhyDual::GetPerModelPhy1 ( ) const

Get the error probability model.

Returns: The error model.

Definition at line 601 of file uan-phy-dual.cc.

References m_phy1.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ GetPerModelPhy2()

Ptr< UanPhyPer > ns3::UanPhyDual::GetPerModelPhy2 ( ) const

Get the error probability model.

Returns: The error model.

Definition at line 609 of file uan-phy-dual.cc.

References m_phy2.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ GetPhy1PacketRx()

Ptr< Packet > ns3::UanPhyDual::GetPhy1PacketRx ( ) const

Get the packet currently being received.

Warning: Returns non-valid pointer if IsStateRx == false.

Returns: The packet.

Definition at line 439 of file uan-phy-dual.cc.

References m_phy1.

◆ GetPhy2PacketRx()

Ptr< Packet > ns3::UanPhyDual::GetPhy2PacketRx ( ) const

Get the packet currently being received.

Warning: Returns non-valid pointer if IsStateRx == false.

Returns: The packet.

Definition at line 445 of file uan-phy-dual.cc.

References m_phy2.

◆ GetRxThresholdDb()

double ns3::UanPhyDual::GetRxThresholdDb ( )

overridevirtual

Get the minimum received signal strength required to receive a packet without errors.

Returns: The minimum required signal strength, in dB.

Implements ns3::UanPhy.

Definition at line 384 of file uan-phy-dual.cc.

References m_phy1.

◆ GetSinrModelPhy1()

Ptr< UanPhyCalcSinr > ns3::UanPhyDual::GetSinrModelPhy1 ( ) const

Get the SINR calculator.

Returns: The SINR calculator.

Definition at line 629 of file uan-phy-dual.cc.

References m_phy1.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ GetSinrModelPhy2()

Ptr< UanPhyCalcSinr > ns3::UanPhyDual::GetSinrModelPhy2 ( ) const

Get the SINR calculator.

Returns: The SINR calculator.

Definition at line 637 of file uan-phy-dual.cc.

References m_phy2.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ GetTransducer()

Ptr< UanTransducer > ns3::UanPhyDual::GetTransducer ( )

overridevirtual

Get the attached transducer.

Returns: The transducer.

Implements ns3::UanPhy.

Definition at line 547 of file uan-phy-dual.cc.

References m_phy1, and NS_LOG_WARN.

◆ GetTxPowerDb()

double ns3::UanPhyDual::GetTxPowerDb ( )

overridevirtual

Get the current transmit power, in dB.

Returns: The transmit power.

Implements ns3::UanPhy.

Definition at line 365 of file uan-phy-dual.cc.

References m_phy1, and NS_LOG_WARN.

◆ GetTxPowerDbPhy1()

double ns3::UanPhyDual::GetTxPowerDbPhy1 ( ) const

Get the current transmit power, in dB.

Returns: The transmit power.

Definition at line 372 of file uan-phy-dual.cc.

References m_phy1.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ GetTxPowerDbPhy2()

double ns3::UanPhyDual::GetTxPowerDbPhy2 ( ) const

Get the current transmit power, in dB.

Returns: The transmit power.

Definition at line 378 of file uan-phy-dual.cc.

References m_phy2.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ GetTypeId()

TypeId ns3::UanPhyDual::GetTypeId ( void )

static

Register this type.

Returns: The TypeId.

Definition at line 166 of file uan-phy-dual.cc.

References GetCcaThresholdPhy1(), GetCcaThresholdPhy2(), ns3::UanPhyGen::GetDefaultModes(), GetModesPhy1(), GetModesPhy2(), GetPerModelPhy1(), GetPerModelPhy2(), GetSinrModelPhy1(), GetSinrModelPhy2(), GetTxPowerDbPhy1(), GetTxPowerDbPhy2(), m_rxErrLogger, m_rxOkLogger, m_txLogger, ns3::MakeDoubleAccessor(), ns3::MakePointerAccessor(), ns3::MakeTraceSourceAccessor(), SetCcaThresholdPhy1(), SetCcaThresholdPhy2(), SetModesPhy1(), SetModesPhy2(), ns3::TypeId::SetParent(), SetPerModelPhy1(), SetPerModelPhy2(), SetSinrModelPhy1(), SetSinrModelPhy2(), SetTxPowerDbPhy1(), and SetTxPowerDbPhy2().

Here is the call graph for this function:

◆ IsPhy1Idle()

bool ns3::UanPhyDual::IsPhy1Idle ( )

Returns: True if Phy is in IDLE state.

Definition at line 409 of file uan-phy-dual.cc.

References m_phy1.

◆ IsPhy1Rx()

bool ns3::UanPhyDual::IsPhy1Rx ( )

Returns: True if Phy is currently in receive mode.

Definition at line 421 of file uan-phy-dual.cc.

References m_phy1.

◆ IsPhy1Tx()

bool ns3::UanPhyDual::IsPhy1Tx ( )

Returns: True if Phy is busy transmitting.

Definition at line 433 of file uan-phy-dual.cc.

References m_phy1.

◆ IsPhy2Idle()

bool ns3::UanPhyDual::IsPhy2Idle ( )

Returns: True if Phy is in IDLE state.

Definition at line 415 of file uan-phy-dual.cc.

References m_phy2.

◆ IsPhy2Rx()

bool ns3::UanPhyDual::IsPhy2Rx ( )

Returns: True if Phy is currently in receive mode.

Definition at line 427 of file uan-phy-dual.cc.

References m_phy2.

◆ IsPhy2Tx()

bool ns3::UanPhyDual::IsPhy2Tx ( )

Returns: True if Phy is busy transmitting.

Definition at line 451 of file uan-phy-dual.cc.

References m_phy2.

◆ IsStateBusy()

bool ns3::UanPhyDual::IsStateBusy ( )

overridevirtual

Returns: True if Phy is neither IDLE nor SLEEP.

Implements ns3::UanPhy.

Definition at line 469 of file uan-phy-dual.cc.

References IsStateIdle(), and IsStateSleep().

Here is the call graph for this function:

◆ IsStateCcaBusy()

bool ns3::UanPhyDual::IsStateCcaBusy ( )

overridevirtual

Returns: True if Phy is in CCABUSY state.

Implements ns3::UanPhy.

Definition at line 487 of file uan-phy-dual.cc.

References m_phy1, and m_phy2.

◆ IsStateIdle()

bool ns3::UanPhyDual::IsStateIdle ( )

overridevirtual

Returns: True if Phy is in IDLE state.

Implements ns3::UanPhy.

Definition at line 463 of file uan-phy-dual.cc.

References m_phy1, and m_phy2.

Referenced by IsStateBusy().

Here is the caller graph for this function:

◆ IsStateRx()

bool ns3::UanPhyDual::IsStateRx ( )

overridevirtual

Returns: True if Phy is currently in receive mode.

Implements ns3::UanPhy.

Definition at line 475 of file uan-phy-dual.cc.

References m_phy1, and m_phy2.

◆ IsStateSleep()

bool ns3::UanPhyDual::IsStateSleep ( )

overridevirtual

Returns: True if Phy is in SLEEP state.

Implements ns3::UanPhy.

Definition at line 457 of file uan-phy-dual.cc.

References m_phy1, and m_phy2.

Referenced by IsStateBusy().

Here is the caller graph for this function:

◆ IsStateTx()

bool ns3::UanPhyDual::IsStateTx ( )

overridevirtual

Returns: True if Phy is busy transmitting.

Implements ns3::UanPhy.

Definition at line 481 of file uan-phy-dual.cc.

References m_phy1, and m_phy2.

◆ NotifyIntChange()

void ns3::UanPhyDual::NotifyIntChange ( )

overridevirtual

Called when there has been a change in the amount of interference this node is experiencing from other transmissions.

Implements ns3::UanPhy.

Definition at line 533 of file uan-phy-dual.cc.

References m_phy1, and m_phy2.

◆ NotifyTransStartTx()

void ns3::UanPhyDual::NotifyTransStartTx	(	Ptr< Packet >	packet,
		double	txPowerDb,
		UanTxMode	txMode
	)

overridevirtual

Called when a transmission is beginning on the attached transducer.

Parameters

packet	Packet that is beginning transmission.
txPowerDb	Transmit power of packet.
txMode	Transmission mode of packet.

Implements ns3::UanPhy.

Definition at line 526 of file uan-phy-dual.cc.

◆ RegisterListener()

void ns3::UanPhyDual::RegisterListener ( UanPhyListener * listener )

overridevirtual

Register a UanPhyListener to be notified of common UanPhy events.

Parameters

listener New listener to register.

Note: You may receive duplicate messages as underneath there are two generic phys here. Each will notify of state changes independently.

Implements ns3::UanPhy.

Definition at line 290 of file uan-phy-dual.cc.

References m_phy1, and m_phy2.

◆ RxErrFromSubPhy()

void ns3::UanPhyDual::RxErrFromSubPhy	(	Ptr< Packet >	pkt,
		double	sinr
	)

private

Handle callback and logger for packets received with error.

Parameters

pkt	The packet.
sinr	The SINR.

Definition at line 665 of file uan-phy-dual.cc.

References m_phy1, m_recErrCb, and m_rxErrLogger.

◆ RxOkFromSubPhy()

void ns3::UanPhyDual::RxOkFromSubPhy	(	Ptr< Packet >	pkt,
		double	sinr,
		UanTxMode	mode
	)

private

Handle callback and logger for packets received without error.

Parameters

pkt	The packet.
sinr	The SINR.
mode	The channel mode.

Definition at line 657 of file uan-phy-dual.cc.

References m_recOkCb, m_rxOkLogger, ns3::Now(), NS_LOG_DEBUG, and ns3::Time::S.

Here is the call graph for this function:

◆ SendPacket()

void ns3::UanPhyDual::SendPacket	(	Ptr< Packet >	pkt,
		uint32_t	modeNum
	)

overridevirtual

Send a packet using a specific transmission mode.

Parameters

pkt	Packet to transmit.
modeNum	Index of mode in SupportedModes list to use for transmission.

Implements ns3::UanPhy.

Definition at line 272 of file uan-phy-dual.cc.

References GetNModes(), m_phy1, m_phy2, m_txLogger, ns3::Now(), NS_LOG_DEBUG, and ns3::Time::S.

Here is the call graph for this function:

◆ SetCcaThresholdDb()

void ns3::UanPhyDual::SetCcaThresholdDb ( double thresh )

overridevirtual

Set the threshold for detecting channel busy.

Parameters

thresh Signal power threshold at receiver.

Implements ns3::UanPhy.

Definition at line 346 of file uan-phy-dual.cc.

References m_phy1, and m_phy2.

◆ SetCcaThresholdPhy1()

void ns3::UanPhyDual::SetCcaThresholdPhy1 ( double thresh )

Set the threshold for detecting channel busy.

Parameters

thresh Signal power threshold at receiver.

Definition at line 353 of file uan-phy-dual.cc.

References m_phy1.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ SetCcaThresholdPhy2()

void ns3::UanPhyDual::SetCcaThresholdPhy2 ( double thresh )

Set the threshold for detecting channel busy.

Parameters

thresh Signal power threshold at receiver.

Definition at line 359 of file uan-phy-dual.cc.

References m_phy2.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ SetChannel()

void ns3::UanPhyDual::SetChannel ( Ptr< UanChannel > channel )

overridevirtual

Attach to a channel.

Parameters

channel The channel to attach to.

Implements ns3::UanPhy.

Definition at line 505 of file uan-phy-dual.cc.

References third::channel, m_phy1, and m_phy2.

◆ SetDevice()

void ns3::UanPhyDual::SetDevice ( Ptr< UanNetDevice > device )

overridevirtual

Set the device hosting this Phy.

Parameters

device The device.

Implements ns3::UanPhy.

Definition at line 512 of file uan-phy-dual.cc.

References m_phy1, and m_phy2.

◆ SetEnergyModelCallback()

void ns3::UanPhyDual::SetEnergyModelCallback ( DeviceEnergyModel::ChangeStateCallback callback )

overridevirtual

Set the DeviceEnergyModel callback for UanPhy device.

Parameters

callback The DeviceEnergyModel change state callback.

Implements ns3::UanPhy.

Definition at line 254 of file uan-phy-dual.cc.

References NS_LOG_DEBUG.

◆ SetMac()

void ns3::UanPhyDual::SetMac ( Ptr< UanMac > mac )

overridevirtual

Set the MAC forwarding messages to this Phy.

Parameters

mac The MAC.

Implements ns3::UanPhy.

Definition at line 519 of file uan-phy-dual.cc.

References m_phy1, m_phy2, and third::mac.

◆ SetModesPhy1()

void ns3::UanPhyDual::SetModesPhy1 ( UanModesList modes )

Set the available modes.

Parameters

modes List of modes.

Definition at line 589 of file uan-phy-dual.cc.

References m_phy1.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ SetModesPhy2()

void ns3::UanPhyDual::SetModesPhy2 ( UanModesList modes )

Set the available modes.

Parameters

modes List of modes.

Definition at line 595 of file uan-phy-dual.cc.

References m_phy2.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ SetPerModelPhy1()

void ns3::UanPhyDual::SetPerModelPhy1 ( Ptr< UanPhyPer > per )

Set the error probability model.

Parameters

per	The error model.

Definition at line 617 of file uan-phy-dual.cc.

References m_phy1.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ SetPerModelPhy2()

void ns3::UanPhyDual::SetPerModelPhy2 ( Ptr< UanPhyPer > per )

Set the error probability model.

Parameters

per	The error model.

Definition at line 623 of file uan-phy-dual.cc.

References m_phy2.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ SetReceiveErrorCallback()

void ns3::UanPhyDual::SetReceiveErrorCallback ( RxErrCallback cb )

overridevirtual

Set the callback to be used when a packet is received with errors.

Parameters

cb	The callback.

Implements ns3::UanPhy.

Definition at line 313 of file uan-phy-dual.cc.

References m_phy1, and m_phy2.

◆ SetReceiveOkCallback()

void ns3::UanPhyDual::SetReceiveOkCallback ( RxOkCallback cb )

overridevirtual

Set the callback to be used when a packet is received without error.

Parameters

cb	The callback.

Implements ns3::UanPhy.

Definition at line 306 of file uan-phy-dual.cc.

References m_phy1, and m_phy2.

◆ SetRxThresholdDb()

void ns3::UanPhyDual::SetRxThresholdDb ( double thresh )

overridevirtual

Set the minimum SINR threshold to receive a packet without errors.

Deprecated:: See UanPhyPer.

Parameters

thresh Threshold SINR for proper reception in dB re 1 uPa.

Implements ns3::UanPhy.

Definition at line 339 of file uan-phy-dual.cc.

References m_phy1, and m_phy2.

◆ SetSinrModelPhy1()

void ns3::UanPhyDual::SetSinrModelPhy1 ( Ptr< UanPhyCalcSinr > calcSinr )

Set the SINR calculator.

Parameters

calcSinr The SINR calculator.

Definition at line 645 of file uan-phy-dual.cc.

References m_phy1.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ SetSinrModelPhy2()

void ns3::UanPhyDual::SetSinrModelPhy2 ( Ptr< UanPhyCalcSinr > calcSinr )

Set the SINR calculator.

Parameters

calcSinr The SINR calculator.

Definition at line 651 of file uan-phy-dual.cc.

References m_phy2.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ SetSleepMode()

void ns3::UanPhyDual::SetSleepMode ( bool sleep )

inlineoverridevirtual

Set the Phy SLEEP mode.

Parameters

sleep SLEEP on or off.

Todo:: This method has to be implemented

Implements ns3::UanPhy.

Definition at line 136 of file uan-phy-dual.h.

◆ SetTransducer()

void ns3::UanPhyDual::SetTransducer ( Ptr< UanTransducer > trans )

overridevirtual

Attach a transducer to this Phy.

Parameters

trans The transducer.

Implements ns3::UanPhy.

Definition at line 540 of file uan-phy-dual.cc.

References m_phy1, and m_phy2.

◆ SetTxPowerDb()

void ns3::UanPhyDual::SetTxPowerDb ( double txpwr )

overridevirtual

Set the transmit power.

Parameters

txpwr Final output transmission power, in dB.

Implements ns3::UanPhy.

Definition at line 320 of file uan-phy-dual.cc.

References m_phy1, and m_phy2.

◆ SetTxPowerDbPhy1()

void ns3::UanPhyDual::SetTxPowerDbPhy1 ( double txpwr )

Set the transmit power.

Parameters

txpwr Final output transmission power, in dB.

Definition at line 327 of file uan-phy-dual.cc.

References m_phy1.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ SetTxPowerDbPhy2()

void ns3::UanPhyDual::SetTxPowerDbPhy2 ( double txpwr )

Set the transmit power.

Parameters

txpwr Final output transmission power, in dB.

Definition at line 333 of file uan-phy-dual.cc.

References m_phy2.

Referenced by GetTypeId().

Here is the caller graph for this function:

◆ StartRxPacket()

void ns3::UanPhyDual::StartRxPacket	(	Ptr< Packet >	pkt,
		double	rxPowerDb,
		UanTxMode	txMode,
		UanPdp	pdp
	)

overridevirtual

Packet arriving from channel: i.e.

leading bit of packet has arrived.

Parameters

pkt	Packet which is arriving.
rxPowerDb	Signal power of incoming packet in dB re 1 uPa.
txMode	Transmission mode defining modulation of incoming packet.
pdp	Power delay profile of incoming packet.

Implements ns3::UanPhy.

Definition at line 297 of file uan-phy-dual.cc.

Member Data Documentation

◆ m_phy1

Ptr<UanPhy> ns3::UanPhyDual::m_phy1

private

◆ m_phy2

Ptr<UanPhy> ns3::UanPhyDual::m_phy2

private

Second Phy layer.

Definition at line 239 of file uan-phy-dual.h.

Referenced by UanPhyDual(), Clear(), GetCcaThresholdPhy2(), GetMode(), GetModesPhy2(), GetNModes(), GetPerModelPhy2(), GetPhy2PacketRx(), GetSinrModelPhy2(), GetTxPowerDbPhy2(), IsPhy2Idle(), IsPhy2Rx(), IsPhy2Tx(), IsStateCcaBusy(), IsStateIdle(), IsStateRx(), IsStateSleep(), IsStateTx(), NotifyIntChange(), RegisterListener(), SendPacket(), SetCcaThresholdDb(), SetCcaThresholdPhy2(), SetChannel(), SetDevice(), SetMac(), SetModesPhy2(), SetPerModelPhy2(), SetReceiveErrorCallback(), SetReceiveOkCallback(), SetRxThresholdDb(), SetSinrModelPhy2(), SetTransducer(), SetTxPowerDb(), and SetTxPowerDbPhy2().

◆ m_recErrCb

RxErrCallback ns3::UanPhyDual::m_recErrCb

private

Callback when packet received with errors.

Definition at line 250 of file uan-phy-dual.h.

Referenced by UanPhyDual(), and RxErrFromSubPhy().

◆ m_recOkCb

RxOkCallback ns3::UanPhyDual::m_recOkCb

private

Callback when packet received without errors.

Definition at line 248 of file uan-phy-dual.h.

Referenced by UanPhyDual(), and RxOkFromSubPhy().

◆ m_rxErrLogger

ns3::TracedCallback<Ptr<const Packet>, double, UanTxMode> ns3::UanPhyDual::m_rxErrLogger

private

A packet was received unsuccessfuly.

Definition at line 244 of file uan-phy-dual.h.

Referenced by GetTypeId(), and RxErrFromSubPhy().

◆ m_rxOkLogger

ns3::TracedCallback<Ptr<const Packet>, double, UanTxMode> ns3::UanPhyDual::m_rxOkLogger

private

A packet was received successfully.

Definition at line 242 of file uan-phy-dual.h.

Referenced by GetTypeId(), and RxOkFromSubPhy().

◆ m_txLogger

ns3::TracedCallback<Ptr<const Packet>, double, UanTxMode> ns3::UanPhyDual::m_txLogger

private

A packet was sent from this Phy.

Definition at line 246 of file uan-phy-dual.h.

Referenced by GetTypeId(), and SendPacket().

The documentation for this class was generated from the following files:

src/uan/model/uan-phy-dual.h
src/uan/model/uan-phy-dual.cc

Public Member Functions

Static Public Member Functions

Protected Member Functions

Private Member Functions

Private Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ UanPhyDual()

◆ ~UanPhyDual()

Member Function Documentation

◆ AssignStreams()

◆ Clear()

◆ DoDispose()

◆ EnergyDepletionHandler()

◆ EnergyRechargeHandler()

◆ GetCcaThresholdDb()

◆ GetCcaThresholdPhy1()

◆ GetCcaThresholdPhy2()

◆ GetChannel()

◆ GetDevice()

◆ GetMode()

◆ GetModesPhy1()

◆ GetModesPhy2()

◆ GetNModes()

◆ GetPacketRx()

◆ GetPerModelPhy1()

◆ GetPerModelPhy2()

◆ GetPhy1PacketRx()

◆ GetPhy2PacketRx()

◆ GetRxThresholdDb()

◆ GetSinrModelPhy1()

◆ GetSinrModelPhy2()

◆ GetTransducer()

◆ GetTxPowerDb()

◆ GetTxPowerDbPhy1()

◆ GetTxPowerDbPhy2()

◆ GetTypeId()

◆ IsPhy1Idle()

◆ IsPhy1Rx()

◆ IsPhy1Tx()

◆ IsPhy2Idle()

◆ IsPhy2Rx()

◆ IsPhy2Tx()

◆ IsStateBusy()

◆ IsStateCcaBusy()

◆ IsStateIdle()

◆ IsStateRx()

◆ IsStateSleep()

◆ IsStateTx()

◆ NotifyIntChange()

◆ NotifyTransStartTx()

◆ RegisterListener()

◆ RxErrFromSubPhy()

◆ RxOkFromSubPhy()

◆ SendPacket()

◆ SetCcaThresholdDb()

◆ SetCcaThresholdPhy1()

◆ SetCcaThresholdPhy2()

◆ SetChannel()

◆ SetDevice()

◆ SetEnergyModelCallback()

◆ SetMac()

◆ SetModesPhy1()

◆ SetModesPhy2()

◆ SetPerModelPhy1()

◆ SetPerModelPhy2()

◆ SetReceiveErrorCallback()

◆ SetReceiveOkCallback()

◆ SetRxThresholdDb()

◆ SetSinrModelPhy1()

◆ SetSinrModelPhy2()

◆ SetSleepMode()

◆ SetTransducer()

◆ SetTxPowerDb()

◆ SetTxPowerDbPhy1()

◆ SetTxPowerDbPhy2()

◆ StartRxPacket()

Member Data Documentation

◆ m_phy1