25 #include <ns3/nstime.h>
26 #include <ns3/callback.h>
27 #include <ns3/config.h>
28 #include <ns3/boolean.h>
29 #include <ns3/double.h>
30 #include <ns3/uinteger.h>
31 #include <ns3/simulator.h>
33 #include <ns3/node-container.h>
34 #include <ns3/net-device-container.h>
35 #include <ns3/ipv4-interface-container.h>
37 #include <ns3/lte-helper.h>
38 #include <ns3/point-to-point-epc-helper.h>
39 #include <ns3/internet-stack-helper.h>
40 #include <ns3/point-to-point-helper.h>
41 #include <ns3/ipv4-address-helper.h>
42 #include <ns3/ipv4-static-routing-helper.h>
43 #include <ns3/mobility-helper.h>
45 #include <ns3/data-rate.h>
46 #include <ns3/ipv4-static-routing.h>
47 #include <ns3/position-allocator.h>
48 #include <ns3/lte-enb-net-device.h>
49 #include <ns3/lte-enb-phy.h>
91 uint8_t gridSizeX, uint8_t gridSizeY,
92 uint16_t sourceCellId, uint16_t targetCellId,
93 std::string handoverAlgorithmType);
110 void HandoverStartCallback (std::string context, uint64_t imsi,
111 uint16_t sourceCellId, uint16_t rnti,
112 uint16_t targetCellId);
118 void CellShutdownCallback ();
125 virtual void DoRun ();
131 virtual void DoTeardown ();
148 uint8_t gridSizeX, uint8_t gridSizeY,
149 uint16_t sourceCellId, uint16_t targetCellId,
150 std::string handoverAlgorithmType)
152 m_uePosition (uePosition),
153 m_gridSizeX (gridSizeX),
154 m_gridSizeY (gridSizeY),
155 m_sourceCellId (sourceCellId),
156 m_targetCellId (targetCellId),
157 m_handoverAlgorithmType (handoverAlgorithmType),
159 m_hasHandoverOccurred (false)
165 uint16_t nEnb = gridSizeX * gridSizeY;
167 if (sourceCellId > nEnb)
172 if (targetCellId > nEnb)
187 uint16_t sourceCellId, uint16_t rnti,
188 uint16_t targetCellId)
190 NS_LOG_FUNCTION (
this << context << imsi << sourceCellId << rnti << targetCellId);
194 "Handover occurred but too early");
196 "Handover occurred but with wrong source cell");
198 "Handover occurred but with wrong target cell");
232 StringValue (
"ns3::FriisSpectrumPropagationLossModel"));
288 enbMobility.
Install (enbNodes);
303 remoteHostContainer.
Create (1);
306 internet.
Install (remoteHostContainer);
315 ipv4h.
SetBase (
"1.0.0.0",
"255.0.0.0");
321 remoteHostStaticRouting->AddNetworkRouteTo (
Ipv4Address (
"7.0.0.0"),
Ipv4Mask (
"255.0.0.0"), 1);
335 for (uint32_t u = 0; u < ueNodes.
GetN (); ++u)
358 lteHelper->
Attach (ueDevs.
Get (0), sourceEnb);
361 Simulator::Schedule (
Seconds (0.5),
367 Simulator::Destroy ();
397 :
TestSuite (
"lte-handover-target", SYSTEM)
413 Vector (20, 40, 0), 2, 2, 1, 3,
414 "ns3::A2A4RsrqHandoverAlgorithm"),
417 Vector (20, 40, 0), 2, 2, 1, 3,
418 "ns3::A3RsrpHandoverAlgorithm"),
428 Vector (150, 90, 0), 3, 2, 5, 2,
429 "ns3::A2A4RsrqHandoverAlgorithm"),
430 TestCase::EXTENSIVE);
432 Vector (150, 90, 0), 3, 2, 5, 2,
433 "ns3::A3RsrpHandoverAlgorithm"),
434 TestCase::EXTENSIVE);
Testing a handover algorithm, verifying that it selects the right target cell when more than one opti...
Ptr< LteEnbNetDevice > m_sourceEnbDev
source ENB device
uint8_t m_gridSizeY
Y grid size.
std::string m_handoverAlgorithmType
handover algorithm type
bool m_hasHandoverOccurred
has handover occurred?
LteHandoverTargetTestCase(std::string name, Vector uePosition, uint8_t gridSizeX, uint8_t gridSizeY, uint16_t sourceCellId, uint16_t targetCellId, std::string handoverAlgorithmType)
Construct a new test case and providing input parameters for the simulation.
void CellShutdownCallback()
A trigger that can be scheduled to "shutdown" the cell pointed by m_sourceCellId by reducing its powe...
uint16_t m_sourceCellId
source cell ID
void HandoverStartCallback(std::string context, uint64_t imsi, uint16_t sourceCellId, uint16_t rnti, uint16_t targetCellId)
Triggers when an eNodeB starts a handover and then verifies that the handover has the right source an...
Vector m_uePosition
UE positions.
uint8_t m_gridSizeX
X grid size.
virtual void DoTeardown()
Called at the end of simulation and verifies that a handover has occurred in the simulation.
uint16_t m_targetCellId
target cell ID
virtual void DoRun()
Run a simulation of a micro-cell network using the parameters provided to the constructor function.
virtual ~LteHandoverTargetTestCase()
Test suite lte-handover-target, verifying that handover algorithms are able to select the right targe...
LteHandoverTargetTestSuite()
AttributeValue implementation for Boolean.
Class for representing data rates.
AttributeValue implementation for DataRate.
This class can be used to hold variables of floating point type such as 'double' or 'float'.
aggregate IP/TCP/UDP functionality to existing Nodes.
void Install(std::string nodeName) const
Aggregate implementations of the ns3::Ipv4, ns3::Ipv6, ns3::Udp, and ns3::Tcp classes onto the provid...
A helper class to make life easier while doing simple IPv4 address assignment in scripts.
void SetBase(Ipv4Address network, Ipv4Mask mask, Ipv4Address base="0.0.0.1")
Set the base network number, network mask and base address.
Ipv4InterfaceContainer Assign(const NetDeviceContainer &c)
Assign IP addresses to the net devices specified in the container based on the current network prefix...
Ipv4 addresses are stored in host order in this class.
Access to the IPv4 forwarding table, interfaces, and configuration.
holds a vector of std::pair of Ptr<Ipv4> and interface index.
a class to represent an Ipv4 address mask
Helper class that adds ns3::Ipv4StaticRouting objects.
Ptr< Ipv4StaticRouting > GetStaticRouting(Ptr< Ipv4 > ipv4) const
Try and find the static routing protocol as either the main routing protocol or in the list of routin...
The eNodeB device implementation.
Ptr< LteEnbPhy > GetPhy(void) const
uint16_t GetCellId() const
void SetEpcHelper(Ptr< EpcHelper > h)
Set the EpcHelper to be used to setup the EPC network in conjunction with the setup of the LTE radio ...
void SetHandoverAlgorithmAttribute(std::string n, const AttributeValue &v)
Set an attribute for the handover algorithm to be created.
NetDeviceContainer InstallEnbDevice(NodeContainer c)
Create a set of eNodeB devices.
void SetHandoverAlgorithmType(std::string type)
Set the type of handover algorithm to be used by eNodeB devices.
void Attach(NetDeviceContainer ueDevices)
Enables automatic attachment of a set of UE devices to a suitable cell using Idle mode initial cell s...
NetDeviceContainer InstallUeDevice(NodeContainer c)
Create a set of UE devices.
void AddX2Interface(NodeContainer enbNodes)
Create an X2 interface between all the eNBs in a given set.
Helper class used to assign positions and mobility models to nodes.
void SetMobilityModel(std::string type, std::string n1="", const AttributeValue &v1=EmptyAttributeValue(), std::string n2="", const AttributeValue &v2=EmptyAttributeValue(), std::string n3="", const AttributeValue &v3=EmptyAttributeValue(), std::string n4="", const AttributeValue &v4=EmptyAttributeValue(), std::string n5="", const AttributeValue &v5=EmptyAttributeValue(), std::string n6="", const AttributeValue &v6=EmptyAttributeValue(), std::string n7="", const AttributeValue &v7=EmptyAttributeValue(), std::string n8="", const AttributeValue &v8=EmptyAttributeValue(), std::string n9="", const AttributeValue &v9=EmptyAttributeValue())
void Install(Ptr< Node > node) const
"Layout" a single node according to the current position allocator type.
void SetPositionAllocator(Ptr< PositionAllocator > allocator)
Set the position allocator which will be used to allocate the initial position of every node initiali...
holds a vector of ns3::NetDevice pointers
Ptr< NetDevice > Get(uint32_t i) const
Get the Ptr<NetDevice> stored in this container at a given index.
virtual Ipv4Address GetUeDefaultGatewayAddress()
virtual Ptr< Node > GetPgwNode() const
Get the PGW node.
virtual Ipv4InterfaceContainer AssignUeIpv4Address(NetDeviceContainer ueDevices)
Assign IPv4 addresses to UE devices.
keep track of a set of node pointers.
uint32_t GetN(void) const
Get the number of Ptr<Node> stored in this container.
void Create(uint32_t n)
Create n nodes and append pointers to them to the end of this NodeContainer.
Ptr< Node > Get(uint32_t i) const
Get the Ptr<Node> stored in this container at a given index.
void SetAttribute(std::string name, const AttributeValue &value)
Set a single attribute, raising fatal errors if unsuccessful.
Ptr< T > GetObject(void) const
Get a pointer to the requested aggregated Object.
Build a set of PointToPointNetDevice objects.
void SetDeviceAttribute(std::string name, const AttributeValue &value)
Set an attribute value to be propagated to each NetDevice created by the helper.
void SetChannelAttribute(std::string name, const AttributeValue &value)
Set an attribute value to be propagated to each Channel created by the helper.
NetDeviceContainer Install(NodeContainer c)
Hold variables of type string.
void AddTestCase(TestCase *testCase, TestDuration duration=QUICK)
Add an individual child TestCase to this test suite.
std::string GetName(void) const
int64_t GetMilliSeconds(void) const
Get an approximation of the time stored in this instance in the indicated unit.
AttributeValue implementation for Time.
Hold an unsigned integer type.
#define NS_ASSERT(condition)
At runtime, in debugging builds, if this condition is not true, the program prints the source file,...
void SetDefault(std::string name, const AttributeValue &value)
void Connect(std::string path, const CallbackBase &cb)
#define NS_FATAL_ERROR(msg)
Report a fatal error with a message and terminate.
#define NS_LOG_COMPONENT_DEFINE(name)
Define a Log component with a specific name.
#define NS_LOG_FUNCTION(parameters)
If log level LOG_FUNCTION is enabled, this macro will output all input parameters separated by ",...
#define NS_LOG_INFO(msg)
Use NS_LOG to output a message of level LOG_INFO.
Time Now(void)
create an ns3::Time instance which contains the current simulation time.
#define NS_TEST_ASSERT_MSG_EQ(actual, limit, msg)
Test that an actual and expected (limit) value are equal and report and abort if not.
#define NS_TEST_ASSERT_MSG_GT(actual, limit, msg)
Test that an actual value is greater than a limit and report and abort if not.
Time Seconds(double value)
Construct a Time in the indicated unit.
Time MilliSeconds(uint64_t value)
Construct a Time in the indicated unit.
Every class exported by the ns3 library is enclosed in the ns3 namespace.
Callback< R, Ts... > MakeCallback(R(T::*memPtr)(Ts...), OBJ objPtr)
Build Callbacks for class method members which take varying numbers of arguments and potentially retu...
static LteHandoverTargetTestSuite g_lteHandoverTargetTestSuiteInstance