23 #include "ns3/simulator.h"
26 #include "ns3/lte-helper.h"
27 #include "ns3/point-to-point-epc-helper.h"
28 #include "ns3/packet-sink-helper.h"
29 #include "ns3/udp-client-server-helper.h"
30 #include "ns3/udp-echo-helper.h"
31 #include "ns3/point-to-point-helper.h"
32 #include "ns3/internet-stack-helper.h"
33 #include "ns3/ipv4-address-helper.h"
34 #include "ns3/inet-socket-address.h"
35 #include "ns3/packet-sink.h"
36 #include <ns3/ipv4-static-routing-helper.h>
37 #include <ns3/ipv4-static-routing.h>
38 #include "ns3/boolean.h"
39 #include "ns3/uinteger.h"
40 #include "ns3/double.h"
41 #include "ns3/abort.h"
42 #include "ns3/mobility-helper.h"
83 interPacketInterval (
Seconds (i))
96 std::vector<UeTestData>
ues;
121 virtual void DoRun (
void);
163 remoteHostContainer.
Create (1);
166 internet.
Install (remoteHostContainer);
175 ipv4h.
SetBase (
"1.0.0.0",
"255.0.0.0");
184 remoteHostStaticRouting->AddNetworkRouteTo (
Ipv4Address (
"7.0.0.0"),
Ipv4Mask (
"255.255.255.0"), 1);
202 uint16_t ulPort = 1000;
204 for (std::vector<EnbTestData>::iterator enbit =
m_enbTestData.begin ();
206 ++enbit, ++enbLteDevIt)
213 ues.
Create (enbit->ues.size ());
229 for (uint32_t u = 0; u < ues.
GetN (); ++u)
241 lteHelper->
Attach (ueLteDevice, *enbLteDevIt);
244 uint16_t dlPort = 2000;
245 for (uint32_t b = 0; b < enbit->ues.at (u).bearers.size (); ++b)
247 BearerTestData& bearerTestData = enbit->ues.at (u).bearers.at (b);
260 apps = client.Install (remoteHost);
276 apps = client.Install (ue);
281 EpsBearer epsBearer (EpsBearer::NGBR_VOICE_VIDEO_GAMING);
300 Config::Set (
"/NodeList/*/DeviceList/*/LteEnbRrc/UeMap/*/RadioBearerMap/*/LteRlc/MaxTxBufferSize",
302 Config::Set (
"/NodeList/*/DeviceList/*/LteUeRrc/RadioBearerMap/*/LteRlc/MaxTxBufferSize",
306 double statsStartTime = 0.040;
307 double statsDuration = 2.0;
315 Simulator::Stop (
Seconds (statsStartTime + statsDuration - 0.0001));
318 uint64_t imsiCounter = 0;
320 for (std::vector<EnbTestData>::iterator enbit =
m_enbTestData.begin ();
324 for (std::vector<UeTestData>::iterator ueit = enbit->ues.begin ();
325 ueit < enbit->ues.end ();
328 uint64_t imsi = ++imsiCounter;
329 for (uint32_t b = 0; b < ueit->bearers.size (); ++b)
334 uint32_t expectedPkts = ueit->bearers.at (b).numPkts;
335 uint32_t expectedBytes = (ueit->bearers.at (b).numPkts) * (ueit->bearers.at (b).pktSize);
336 uint32_t txPktsPdcpDl = lteHelper->
GetPdcpStats ()->GetDlTxPackets (imsi, lcid);
337 uint32_t rxPktsPdcpDl = lteHelper->
GetPdcpStats ()->GetDlRxPackets (imsi, lcid);
338 uint32_t txPktsPdcpUl = lteHelper->
GetPdcpStats ()->GetUlTxPackets (imsi, lcid);
339 uint32_t rxPktsPdcpUl = lteHelper->
GetPdcpStats ()->GetUlRxPackets (imsi, lcid);
340 uint32_t rxBytesDl = ueit->bearers.at (b).dlServerApp->GetTotalRx ();
341 uint32_t rxBytesUl = ueit->bearers.at (b).ulServerApp->GetTotalRx ();
346 "wrong TX PDCP packets in downlink for IMSI=" << imsi <<
" LCID=" << (uint16_t) lcid);
350 "wrong RX PDCP packets in downlink for IMSI=" << imsi <<
" LCID=" << (uint16_t) lcid);
353 "wrong TX PDCP packets in uplink for IMSI=" << imsi <<
" LCID=" << (uint16_t) lcid);
356 "wrong RX PDCP packets in uplink for IMSI=" << imsi <<
" LCID=" << (uint16_t) lcid);
360 "wrong total received bytes in downlink");
363 "wrong total received bytes in uplink");
368 Simulator::Destroy ();
390 std::vector<EnbTestData> v1;
395 e1.
ues.push_back (u1);
399 std::vector<EnbTestData> v2;
404 e2.
ues.push_back (u2_1);
408 e2.
ues.push_back (u2_2);
412 std::vector<EnbTestData> v3;
421 e4.
ues.push_back (u4_1);
425 e4.
ues.push_back (u4_2);
429 e4.
ues.push_back (u4_3);
430 std::vector<EnbTestData> v4;
440 e5.
ues.push_back (u5);
441 std::vector<EnbTestData> v5;
450 e6.
ues.push_back (u6);
451 std::vector<EnbTestData> v6;
461 e7.
ues.push_back (u7);
462 std::vector<EnbTestData> v7;
470 e8.
ues.push_back (u8);
471 std::vector<EnbTestData> v8;
480 e9.
ues.push_back (u9);
481 std::vector<EnbTestData> v9;
Test that e2e packet flow is correct.
LteEpcE2eDataTestCase(std::string name, std::vector< EnbTestData > v)
Constructor.
virtual void DoRun(void)
Implementation to actually run this TestCase.
std::vector< EnbTestData > m_enbTestData
the ENB test data
virtual ~LteEpcE2eDataTestCase()
Test that the S1-U interface implementation works correctly.
holds a vector of ns3::Application pointers.
Ptr< Application > Get(uint32_t i) const
Get the Ptr<Application> stored in this container at a given index.
void Start(Time start)
Arrange for all of the Applications in this container to Start() at the Time given as a parameter.
AttributeValue implementation for Boolean.
Class for representing data rates.
AttributeValue implementation for DataRate.
This class can be used to hold variables of floating point type such as 'double' or 'float'.
This class contains the specification of EPS Bearers.
aggregate IP/TCP/UDP functionality to existing Nodes.
void Install(std::string nodeName) const
Aggregate implementations of the ns3::Ipv4, ns3::Ipv6, ns3::Udp, and ns3::Tcp classes onto the provid...
A helper class to make life easier while doing simple IPv4 address assignment in scripts.
void SetBase(Ipv4Address network, Ipv4Mask mask, Ipv4Address base="0.0.0.1")
Set the base network number, network mask and base address.
Ipv4InterfaceContainer Assign(const NetDeviceContainer &c)
Assign IP addresses to the net devices specified in the container based on the current network prefix...
Ipv4 addresses are stored in host order in this class.
Access to the IPv4 forwarding table, interfaces, and configuration.
holds a vector of std::pair of Ptr<Ipv4> and interface index.
Ipv4Address GetAddress(uint32_t i, uint32_t j=0) const
a class to represent an Ipv4 address mask
Helper class that adds ns3::Ipv4StaticRouting objects.
Ptr< Ipv4StaticRouting > GetStaticRouting(Ptr< Ipv4 > ipv4) const
Try and find the static routing protocol as either the main routing protocol or in the list of routin...
Ptr< RadioBearerStatsCalculator > GetPdcpStats(void)
void SetEpcHelper(Ptr< EpcHelper > h)
Set the EpcHelper to be used to setup the EPC network in conjunction with the setup of the LTE radio ...
NetDeviceContainer InstallEnbDevice(NodeContainer c)
Create a set of eNodeB devices.
void Attach(NetDeviceContainer ueDevices)
Enables automatic attachment of a set of UE devices to a suitable cell using Idle mode initial cell s...
NetDeviceContainer InstallUeDevice(NodeContainer c)
Create a set of UE devices.
void EnablePdcpTraces(void)
Enable trace sinks for PDCP layer.
uint8_t ActivateDedicatedEpsBearer(NetDeviceContainer ueDevices, EpsBearer bearer, Ptr< EpcTft > tft)
Activate a dedicated EPS bearer on a given set of UE devices.
Helper class used to assign positions and mobility models to nodes.
void SetMobilityModel(std::string type, std::string n1="", const AttributeValue &v1=EmptyAttributeValue(), std::string n2="", const AttributeValue &v2=EmptyAttributeValue(), std::string n3="", const AttributeValue &v3=EmptyAttributeValue(), std::string n4="", const AttributeValue &v4=EmptyAttributeValue(), std::string n5="", const AttributeValue &v5=EmptyAttributeValue(), std::string n6="", const AttributeValue &v6=EmptyAttributeValue(), std::string n7="", const AttributeValue &v7=EmptyAttributeValue(), std::string n8="", const AttributeValue &v8=EmptyAttributeValue(), std::string n9="", const AttributeValue &v9=EmptyAttributeValue())
void Install(Ptr< Node > node) const
"Layout" a single node according to the current position allocator type.
void SetPositionAllocator(Ptr< PositionAllocator > allocator)
Set the position allocator which will be used to allocate the initial position of every node initiali...
Keep track of the current position and velocity of an object.
holds a vector of ns3::NetDevice pointers
Iterator End(void) const
Get an iterator which indicates past-the-last NetDevice in the container.
std::vector< Ptr< NetDevice > >::const_iterator Iterator
NetDevice container iterator.
Iterator Begin(void) const
Get an iterator which refers to the first NetDevice in the container.
Ptr< NetDevice > Get(uint32_t i) const
Get the Ptr<NetDevice> stored in this container at a given index.
virtual Ipv4Address GetUeDefaultGatewayAddress()
virtual Ptr< Node > GetPgwNode() const
Get the PGW node.
virtual Ipv4InterfaceContainer AssignUeIpv4Address(NetDeviceContainer ueDevices)
Assign IPv4 addresses to UE devices.
keep track of a set of node pointers.
uint32_t GetN(void) const
Get the number of Ptr<Node> stored in this container.
void Create(uint32_t n)
Create n nodes and append pointers to them to the end of this NodeContainer.
Ptr< Node > Get(uint32_t i) const
Get the Ptr<Node> stored in this container at a given index.
void SetAttribute(std::string name, const AttributeValue &value)
Set a single attribute, raising fatal errors if unsuccessful.
Ptr< T > GetObject(void) const
Get a pointer to the requested aggregated Object.
A helper to make it easier to instantiate an ns3::PacketSinkApplication on a set of nodes.
ApplicationContainer Install(NodeContainer c) const
Install an ns3::PacketSinkApplication on each node of the input container configured with all the att...
Receive and consume traffic generated to an IP address and port.
Build a set of PointToPointNetDevice objects.
void SetDeviceAttribute(std::string name, const AttributeValue &value)
Set an attribute value to be propagated to each NetDevice created by the helper.
void SetChannelAttribute(std::string name, const AttributeValue &value)
Set an attribute value to be propagated to each Channel created by the helper.
NetDeviceContainer Install(NodeContainer c)
Hold variables of type string.
void AddTestCase(TestCase *testCase, TestDuration duration=QUICK)
Add an individual child TestCase to this test suite.
std::string CreateTempDirFilename(std::string filename)
Construct the full path to a file in a temporary directory.
std::string GetName(void) const
Simulation virtual time values and global simulation resolution.
AttributeValue implementation for Time.
Create an application which sends a UDP packet and waits for an echo of this packet.
Hold an unsigned integer type.
void Reset(void)
Reset the initial value of every attribute as well as the value of every global to what they were bef...
void SetDefault(std::string name, const AttributeValue &value)
void Set(std::string path, const AttributeValue &value)
#define NS_ABORT_IF(cond)
Abnormal program termination if a condition is true.
#define NS_LOG_COMPONENT_DEFINE(name)
Define a Log component with a specific name.
#define NS_LOG_FUNCTION(parameters)
If log level LOG_FUNCTION is enabled, this macro will output all input parameters separated by ",...
LteEpcE2eDataTestSuite g_lteEpcE2eDataTestSuite
the test suite
#define NS_TEST_ASSERT_MSG_EQ(actual, limit, msg)
Test that an actual and expected (limit) value are equal and report and abort if not.
Time Seconds(double value)
Construct a Time in the indicated unit.
Every class exported by the ns3 library is enclosed in the ns3 namespace.
Time interPacketInterval
the inter packet interval time
uint32_t numPkts
the number of packets
uint32_t pktSize
the packet size
BearerTestData(uint32_t n, uint32_t s, double i)
Constructor.
Ptr< PacketSink > dlServerApp
the DL server app
Ptr< Application > ulClientApp
the UL client app
Ptr< PacketSink > ulServerApp
the UL server app
Ptr< Application > dlClientApp
the DL client app
std::vector< UeTestData > ues
the list of UEs
std::vector< BearerTestData > bearers
the bearer test data
Implement the data structure representing a TrafficFlowTemplate Packet Filter.
uint16_t localPortEnd
end of the port number range of the UE
uint16_t remotePortEnd
end of the port number range of the remote host
uint16_t remotePortStart
start of the port number range of the remote host
uint16_t localPortStart
start of the port number range of the UE
static Vector GetPosition(Ptr< Node > node)
uint32_t pktSize
packet size used for the simulation (in bytes)