Classes
class	AirtimeLinkMetricCalculator
	Airtime link metric calculator. More...

class	DestinationAddressUnit
	Describes an address unit in PREQ information element See 7.3.2.96 for more details. More...

class	Dot11sMeshCapability
	A set of values indicating whether a mesh STA is a possible candidate for mesh peering establishment (Section 8.4.2.100.8 of IEEE 802.11-2012) More...

class	HwmpProtocol
	Hybrid wireless mesh protocol – a mesh routing protocol defined in IEEE 802.11-2012 standard. More...

class	HwmpProtocolMac
	Interface MAC plugin for HWMP – 802.11s routing protocol. More...

class	HwmpRtable
	Routing table for HWMP – 802.11s routing protocol. More...

class	HwmpTag
	Hwmp tag implements interaction between HWMP protocol and MeshWifiMac. More...

class	IeBeaconTiming
	See 7.3.2.89 of 802.11s draft 2.07. More...

class	IeBeaconTimingUnit
	Information element describing one unit of beacon timing element. More...

class	IeConfiguration
	Describes Mesh Configuration Element see 7.3.2.86 of 802.11s draft 3.0. More...

class	IeLinkMetricReport
	a IEEE 802.11s Mesh ID 7.3.2.88 of 802.11s draft 3.0 More...

class	IeMeshId
	a IEEE 802.11 Mesh ID element (Section 8.4.2.101 of IEEE 802.11-2012) More...

class	IePeeringProtocol
	Mesh Peering Protocol Identifier information element Note that it does not permit to set any value besides zero (corresponding to mesh peering management protocol) More...

class	IePeerManagement
	according to IEEE 802.11 - 2012 More...

class	IePerr
	See 7.3.2.98 of 802.11s draft 2.07. More...

class	IePrep
	See 7.3.2.97 of 802.11s draft 2.07. More...

class	IePreq
	See 7.3.2.96 of 802.11s draft 2.07. More...

class	IeRann
	Root announcement (RANN) element. More...

class	MeshHeader
	Mesh Control field, see Section 8.2.4.7.3 IEEE 802.11-2012. More...

class	PeerLink
	Peer link model for 802.11s Peer Management protocol. More...

class	PeerLinkCloseStart
	802.11s Peer link close management frame More...

class	PeerLinkConfirmStart
	802.11s Peer link confirm management frame More...

class	PeerLinkOpenStart
	802.11s Peer link open management frame More...

class	PeerManagementProtocol
	802.11s Peer Management Protocol model More...

class	PeerManagementProtocolMac
	This is plugin to Mesh WiFi MAC, which implements the interface to dot11s peer management protocol: it takes proper frames from MAC-layer, extracts peer link management information element and mesh configuration element and passes it to main part of protocol. More...

struct	RouteChange
	Structure to encapsulate route change information. More...

Enumerations
enum	dot11sAuthenticationProtocol { AUTH_NULL = 0x00 , AUTH_SAE = 0x01 , AUTH_IEEE = 0x02 }

enum	dot11sCongestionControlMode { CONGESTION_SIGNALING = 0x01 , CONGESTION_NULL = 0x00 }

enum	dot11sPathSelectionMetric { METRIC_AIRTIME = 0x01 }

enum	dot11sPathSelectionProtocol { PROTOCOL_HWMP = 0x01 }

enum	dot11sSynchronizationProtocolIdentifier { SYNC_NEIGHBOUR_OFFSET = 0x01 , SYNC_NULL = 0x00 }

enum	PmpReasonCode { REASON11S_PEERING_CANCELLED = 52 , REASON11S_MESH_MAX_PEERS = 53 , REASON11S_MESH_CAPABILITY_POLICY_VIOLATION = 54 , REASON11S_MESH_CLOSE_RCVD = 55 , REASON11S_MESH_MAX_RETRIES = 56 , REASON11S_MESH_CONFIRM_TIMEOUT = 57 , REASON11S_MESH_INVALID_GTK = 58 , REASON11S_MESH_INCONSISTENT_PARAMETERS = 59 , REASON11S_MESH_INVALID_SECURITY_CAPABILITY =60 , REASON11S_RESERVED = 67 }
	Codes used by 802.11s Peer Management Protocol. More...

Functions
bool	operator< (const IeLinkMetricReport &a, const IeLinkMetricReport &b)

std::ostream &	operator<< (std::ostream &os, const IeBeaconTiming &a)

std::ostream &	operator<< (std::ostream &os, const IeConfiguration &a)

std::ostream &	operator<< (std::ostream &os, const IeLinkMetricReport &a)

std::ostream &	operator<< (std::ostream &os, const IeMeshId &meshId)
	Stream insertion operator. More...

std::ostream &	operator<< (std::ostream &os, const IePeeringProtocol &a)

std::ostream &	operator<< (std::ostream &os, const IePeerManagement &a)

std::ostream &	operator<< (std::ostream &os, const IePerr &a)

std::ostream &	operator<< (std::ostream &os, const IePrep &a)

std::ostream &	operator<< (std::ostream &os, const IePreq &a)

std::ostream &	operator<< (std::ostream &os, const IeRann &a)

bool	operator== (const DestinationAddressUnit &a, const DestinationAddressUnit &b)

bool	operator== (const Dot11sMeshCapability &a, const Dot11sMeshCapability &b)

bool	operator== (const IeBeaconTimingUnit &a, const IeBeaconTimingUnit &b)

bool	operator== (const IeConfiguration &a, const IeConfiguration &b)

bool	operator== (const IeLinkMetricReport &a, const IeLinkMetricReport &b)

bool	operator== (const IeMeshId &a, const IeMeshId &b)

bool	operator== (const IePeerManagement &a, const IePeerManagement &b)

bool	operator== (const IePerr &a, const IePerr &b)

bool	operator== (const IePrep &a, const IePrep &b)

bool	operator== (const IePreq &a, const IePreq &b)

bool	operator== (const IeRann &a, const IeRann &b)

bool	operator== (const MeshHeader &a, const MeshHeader &b)

bool	operator== (const PeerLinkCloseStart &a, const PeerLinkCloseStart &b)

bool	operator== (const PeerLinkConfirmStart &a, const PeerLinkConfirmStart &b)

bool	operator== (const PeerLinkOpenStart &a, const PeerLinkOpenStart &b)

bool	operator> (const IeLinkMetricReport &a, const IeLinkMetricReport &b)

std::istream &	operator>> (std::istream &is, IeMeshId &a)

Enumeration Type Documentation

◆ dot11sAuthenticationProtocol

enum ns3::dot11s::dot11sAuthenticationProtocol

Enumerator
AUTH_NULL
AUTH_SAE
AUTH_IEEE

Definition at line 60 of file ie-dot11s-configuration.h.

◆ dot11sCongestionControlMode

enum ns3::dot11s::dot11sCongestionControlMode

Enumerator
CONGESTION_SIGNALING
CONGESTION_NULL

Definition at line 46 of file ie-dot11s-configuration.h.

◆ dot11sPathSelectionMetric

enum ns3::dot11s::dot11sPathSelectionMetric

Enumerator
METRIC_AIRTIME

Definition at line 40 of file ie-dot11s-configuration.h.

◆ dot11sPathSelectionProtocol

enum ns3::dot11s::dot11sPathSelectionProtocol

Enumerator
PROTOCOL_HWMP

Definition at line 34 of file ie-dot11s-configuration.h.

◆ dot11sSynchronizationProtocolIdentifier

enum ns3::dot11s::dot11sSynchronizationProtocolIdentifier

Enumerator
SYNC_NEIGHBOUR_OFFSET
SYNC_NULL

Definition at line 53 of file ie-dot11s-configuration.h.

Function Documentation

◆ operator<()

bool ns3::dot11s::operator<	(	const IeLinkMetricReport &	a,
		const IeLinkMetricReport &	b
	)

Parameters

a	lhs
b	lhs

Returns: true if equal

Definition at line 76 of file ie-dot11s-metric-report.cc.

◆ operator<<() [1/10]

std::ostream & ns3::dot11s::operator<<	(	std::ostream &	os,
		const IeBeaconTiming &	a
	)

Definition at line 214 of file ie-dot11s-beacon-timing.cc.

References ns3::dot11s::IeBeaconTiming::Print().

Here is the call graph for this function:

◆ operator<<() [2/10]

std::ostream & ns3::dot11s::operator<<	(	std::ostream &	os,
		const IeConfiguration &	a
	)

Definition at line 212 of file ie-dot11s-configuration.cc.

References ns3::dot11s::IeConfiguration::Print().

Here is the call graph for this function:

◆ operator<<() [3/10]

std::ostream & ns3::dot11s::operator<<	(	std::ostream &	os,
		const IeLinkMetricReport &	a
	)

Definition at line 86 of file ie-dot11s-metric-report.cc.

References ns3::dot11s::IeLinkMetricReport::Print().

Here is the call graph for this function:

◆ operator<<() [4/10]

std::ostream & ns3::dot11s::operator<<	(	std::ostream &	os,
		const IeMeshId &	meshId
	)

Stream insertion operator.

Parameters

[in]	os	The reference to the output stream.
[in]	meshId	The IeMeshId object.

Returns: The reference to the output stream.

Definition at line 137 of file ie-dot11s-id.cc.

References ns3::dot11s::IeMeshId::Print().

Here is the call graph for this function:

◆ operator<<() [5/10]

std::ostream& ns3::dot11s::operator<<	(	std::ostream &	os,
		const IePeeringProtocol &	a
	)

Definition at line 55 of file ie-dot11s-peering-protocol.cc.

References ns3::dot11s::IePeeringProtocol::Print().

Here is the call graph for this function:

◆ operator<<() [6/10]

std::ostream & ns3::dot11s::operator<<	(	std::ostream &	os,
		const IePeerManagement &	a
	)

Definition at line 167 of file ie-dot11s-peer-management.cc.

References ns3::dot11s::IePeerManagement::Print().

Here is the call graph for this function:

◆ operator<<() [7/10]

std::ostream & ns3::dot11s::operator<<	(	std::ostream &	os,
		const IePerr &	a
	)

Definition at line 167 of file ie-dot11s-perr.cc.

References ns3::dot11s::IePerr::Print().

Here is the call graph for this function:

◆ operator<<() [8/10]

std::ostream & ns3::dot11s::operator<<	(	std::ostream &	os,
		const IePrep &	a
	)

Definition at line 205 of file ie-dot11s-prep.cc.

References ns3::dot11s::IePrep::Print().

Here is the call graph for this function:

◆ operator<<() [9/10]

std::ostream & ns3::dot11s::operator<<	(	std::ostream &	os,
		const IePreq &	a
	)

Definition at line 438 of file ie-dot11s-preq.cc.

References ns3::dot11s::IePreq::Print().

Here is the call graph for this function:

◆ operator<<() [10/10]

std::ostream & ns3::dot11s::operator<<	(	std::ostream &	os,
		const IeRann &	a
	)

Definition at line 170 of file ie-dot11s-rann.cc.

References ns3::dot11s::IeRann::Print().

Here is the call graph for this function:

◆ operator==() [1/15]

bool ns3::dot11s::operator==	(	const DestinationAddressUnit &	a,
		const DestinationAddressUnit &	b
	)

Parameters

a	lhs
b	rhs

Returns: true if equal

Definition at line 384 of file ie-dot11s-preq.cc.

◆ operator==() [2/15]

bool ns3::dot11s::operator==	(	const Dot11sMeshCapability &	a,
		const Dot11sMeshCapability &	b
	)

Parameters

a	lhs
b	rhs

Returns: true if equal

Definition at line 199 of file ie-dot11s-configuration.cc.

◆ operator==() [3/15]

bool ns3::dot11s::operator==	(	const IeBeaconTimingUnit &	a,
		const IeBeaconTimingUnit &	b
	)

Parameters

a	lhs
b	rhs

Returns: true if equal

Definition at line 185 of file ie-dot11s-beacon-timing.cc.

◆ operator==() [4/15]

bool ns3::dot11s::operator==	(	const IeConfiguration &	a,
		const IeConfiguration &	b
	)

Parameters

a	lhs
b	rhs

Returns: true if equal

Definition at line 206 of file ie-dot11s-configuration.cc.

◆ operator==() [5/15]

bool ns3::dot11s::operator==	(	const IeLinkMetricReport &	a,
		const IeLinkMetricReport &	b
	)

Parameters

a	lhs
b	lhs

Returns: true if equal

Definition at line 72 of file ie-dot11s-metric-report.cc.

◆ operator==() [6/15]

bool ns3::dot11s::operator==	(	const IeMeshId &	a,
		const IeMeshId &	b
	)

Parameters

a	lhs
b	lhs

Returns: true if equal

Definition at line 121 of file ie-dot11s-id.cc.

◆ operator==() [7/15]

bool ns3::dot11s::operator==	(	const IePeerManagement &	a,
		const IePeerManagement &	b
	)

Parameters

a	lhs
b	rhs

Returns: true if equal

Definition at line 162 of file ie-dot11s-peer-management.cc.

◆ operator==() [8/15]

bool ns3::dot11s::operator==	(	const IePerr &	a,
		const IePerr &	b
	)

Parameters

a	lhs
b	rhs

Returns: true if equal

Definition at line 148 of file ie-dot11s-perr.cc.

◆ operator==() [9/15]

bool ns3::dot11s::operator==	(	const IePrep &	a,
		const IePrep &	b
	)

Parameters

a	lhs
b	rhs

Returns: true if equal

Definition at line 198 of file ie-dot11s-prep.cc.

◆ operator==() [10/15]

bool ns3::dot11s::operator==	(	const IePreq &	a,
		const IePreq &	b
	)

Parameters

a	lhs
b	rhs

Returns: true if equal

Definition at line 390 of file ie-dot11s-preq.cc.

◆ operator==() [11/15]

bool ns3::dot11s::operator==	(	const IeRann &	a,
		const IeRann &	b
	)

Parameters

a	lhs
b	rhs

Returns: true if equal

Definition at line 164 of file ie-dot11s-rann.cc.

◆ operator==() [12/15]

bool ns3::dot11s::operator==	(	const MeshHeader &	a,
		const MeshHeader &	b
	)

Parameters

a	left hand side
b	right hand side

Returns: true if equal

Definition at line 172 of file dot11s-mac-header.cc.

◆ operator==() [13/15]

bool ns3::dot11s::operator==	(	const PeerLinkCloseStart &	a,
		const PeerLinkCloseStart &	b
	)

Parameters

a	lhs
b	rhs

Returns: true if equal

Definition at line 205 of file peer-link-frame.cc.

◆ operator==() [14/15]

bool ns3::dot11s::operator==	(	const PeerLinkConfirmStart &	a,
		const PeerLinkConfirmStart &	b
	)

Parameters

a	lhs
b	rhs

Returns: true if equal

Definition at line 300 of file peer-link-frame.cc.

◆ operator==() [15/15]

bool ns3::dot11s::operator==	(	const PeerLinkOpenStart &	a,
		const PeerLinkOpenStart &	b
	)

Parameters

a	lhs
b	rhs

Returns: true if equal

Definition at line 130 of file peer-link-frame.cc.

◆ operator>()

bool ns3::dot11s::operator>	(	const IeLinkMetricReport &	a,
		const IeLinkMetricReport &	b
	)

Parameters

a	lhs
b	lhs

Returns: true if equal

Definition at line 82 of file ie-dot11s-metric-report.cc.

◆ operator>>()

std::istream& ns3::dot11s::operator>>	(	std::istream &	is,
		IeMeshId &	a
	)

Definition at line 144 of file ie-dot11s-id.cc.

Classes

Enumerations

Functions

Enumeration Type Documentation

◆ dot11sAuthenticationProtocol

◆ dot11sCongestionControlMode

◆ dot11sPathSelectionMetric

◆ dot11sPathSelectionProtocol

◆ dot11sSynchronizationProtocolIdentifier

Function Documentation

◆ operator<()

◆ operator<<() [1/10]

◆ operator<<() [2/10]

◆ operator<<() [3/10]

◆ operator<<() [4/10]

◆ operator<<() [5/10]

◆ operator<<() [6/10]

◆ operator<<() [7/10]

◆ operator<<() [8/10]

◆ operator<<() [9/10]

◆ operator<<() [10/10]

◆ operator==() [1/15]

◆ operator==() [2/15]

◆ operator==() [3/15]

◆ operator==() [4/15]

◆ operator==() [5/15]

◆ operator==() [6/15]

◆ operator==() [7/15]

◆ operator==() [8/15]

◆ operator==() [9/15]

◆ operator==() [10/15]

◆ operator==() [11/15]

◆ operator==() [12/15]

◆ operator==() [13/15]

◆ operator==() [14/15]

◆ operator==() [15/15]

◆ operator>()

◆ operator>>()